14 Cu Ft Refrigerator Dimensions | What Fits Your Kitchen

A 14 cu ft refrigerator measures roughly 28 inches wide, 60–63 inches high, and 28–30 inches deep, though exact sizes vary by model.

Whether you’re replacing an old unit or squeezing one into a tight galley kitchen, knowing the real footprint matters. The 14-cubic-foot class splits into two very different shapes: standard top-freezer models that hover near 28 inches wide, and taller specialty columns that trade width for height. Before you measure anything, one rule saves most installation headaches: cabinet depth, door swing, and clearance are three separate numbers, and mixing them up is how refrigerators end up blocking hallways.

The Usual Size Range For A 14 Cu Ft Fridge

Most 14 cu ft top-freezer refrigerators cluster tightly around the same footprint. Across the models documented in manufacturer spec sheets, the typical width lands between 27.5 and 28 inches, height between 59.9 and 62.9 inches, and depth between 28 and 30 inches. Amana’s ART104TFD spec sheet, for example, lists a 14 cu ft unit at 62-7/8 inches high, 28 inches wide, and 30 inches deep.

The number that surprises most buyers is door-open depth. That same Amana model needs 56-3/4 inches of floor space with the door swung open 90 degrees — nearly double its nominal depth. If your fridge sits across from a counter or pantry door, that swing radius decides whether the layout actually works.

Model-By-Model Dimensions At A Glance

Spec sheets vary in how they measure depth, so compare carefully. Here is what the official documentation shows for three current models:

Notice the Samsung column model: a 14 cu ft capacity in a 23-inch-wide frame that stands 73 inches tall. That is the specialty shape in this class, designed for narrow kitchens where counter depth is scarce.

Before you commit, measure your space against the largest dimensions, not the smallest. Frigidaire’s specification for the FFHT1425VV lists height without the hinge — adding the hinge raises the number slightly. And for 14 cu ft refrigerator recommendations that fit real spaces, our tested roundup compares these footprints side by side.

Clearance Rules That Prevent Installation Failure

Manufacturers require breathing room around the cabinet, and ignoring it leads to overheating and premature compressor failure. Amana’s cutout guidance for the ART104TFD calls for 1/2 inch of clearance on the sides and top and a full 1 inch at the rear. Frigidaire’s spec sheet lists similar expectations. A fridge wedged flush against walls on all sides cannot dissipate heat properly.

Beyond the cabinet itself, confirm the door can open fully in your space. Measure from the front of the fridge to any opposite wall or countertop, then compare that distance against the door-open depth listed on the spec sheet. That 56-inch swing number on many models means a narrow kitchen may need the door to open less than 90 degrees — acceptable for daily use but worth knowing before delivery.

Does “14 Cu Ft” Actually Match The Space?

The cubic-foot rating describes internal volume, not cabinet size, so two fridges with identical capacity can have very different footprints. A taller, narrower column stores the same as a shorter, wider top-freezer unit. Match the shape to your kitchen’s constraint: width-limited spaces favor the Samsung-style column; height-limited alcoves need the shorter Frigidaire profile.

When you are ready to buy, measure the alcove width, height, and depth at their tightest points, then compare against the spec sheet’s largest dimensions — including handles and hinges. Allow the manufacturer’s stated clearances on top of that. Our tested picks for the best 14 cu ft refrigerators include real installation notes that catch these fit problems before you order.

Final word: a 14 cu ft refrigerator is not one size. It is a capacity class spanning two very different cabinet shapes. Measure your space first, then choose the model whose footprint — not just its cubic feet — fits the room.